Tire warmer sets similar to the ones used by the KRT superbike team. Tire warmers with carbon-fibre heating technology. This gives fast heating of tire and rim without local overheating and a constant temperature. The sides of the tire warmer reach far over the rim flange keep the heat inside. This way the pressure of the tyre is stabilized. A high precision thermostat ensures a target temperature of 80-85 °C.
At an ambient temperature of 20 °C, it takes approx. 35 minutes to reach a tyre temperature of 80-85 °C and a rim temperature of approx. 40°C.
The tire warmers are equipped with a red indicator LED to indicate the active heating mode. Sidewalls made of high quality heat-resistant ‘NOMEX for optimum reliability. A central velcro flap and elastics integrated at the side enable easy and fast assembly and disassembly.
Connection is 1.8 m power cable, with Euro plug.
Suitable for front 120-17" and rear 195-200-17" tires.
Tyre warmer set "Advanced" Fitted with a high-precision thermo switch, this instrument informs you when the temperature (80°C) is reached and will keep it within a range of +- 2°C.
Heating part is made of a carbon resistor covered with thermo conductive silicon. Material in contact with the tyre is anti-adherent, anti-cut and anti-abrasion. External surface is washable.
Akrapovic full racing exhaust system with stainless steel headers, collectors and link pipe and carbon fibre muffler. Contains 2 holes for front and rear oxygen sensors and adapters to allow fitment of original M12 small of aftermarket big oxygen sensors. Plug is supplied to seal of one of the holes. Compact carbon fiber muffler with slash-cut carbon endcap. Including removable stainless steel noise reduction insert. (± 105dB<->±107dB) Power +1.6 kW (2.1 hp) at 14500 rpm. Torque +2.2 Nm at 7000 rpm Weight -5.2 kg Should only be used in combination with fuel injection tuning to prevent engine damage and achieve maximum performance. (Not for street use) Ti EU5+ (double O2 sensor)
